用蓝牙耳机能用 外放插入耳机都不能用
因为蓝牙耳机里面就有一个声卡。
原来如此 本打算买个USB 声卡 但是嫌麻烦
你这个可能是ALC235。
如果凤凰OS里面有声音，进去看看lsmod加载的是什么驱动。alsa_aplay -l 也看看。
fydeos里面在终端也用lsmod 和 dmesg和 aplay -l 来看看。
crosh> shell sudo su
chronos@localhost / $ lsmod
Module Size Used by
nls_iso8859_1 16384 1
nls_cp437 20480 1
vfat 20480 1
fat 65536 1 vfat
vhost_vsock 20480 0
vhost 28672 1 vhost_vsock
vmw_vsock_virtio_transport_common 20480 1 vhost_vsock
vsock 36864 12 vmw_vsock_virtio_transport_common,vhost_vsock
8021q 24576 0
ccm 20480 3
uinput 20480 0
veth 24576 0
iio_trig_sysfs 16384 0
hid_sensor_accel_3d 16384 0
hid_sensor_trigger 16384 2 hid_sensor_accel_3d
hid_sensor_iio_common 16384 2 hid_sensor_trigger,hid_sensor_accel_3d
industrialio_triggered_buffer 16384 1 hid_sensor_accel_3d
kfifo_buf 16384 1 industrialio_triggered_buffer
industrialio 53248 5 industrialio_triggered_buffer,hid_sensor_trigger,kfifo_buf,iio_trig_sysfs,hid_sensor_accel_3d
hid_sensor_custom 20480 0
snd_soc_sst_broadwell 16384 2
hid_sensor_hub 20480 4 hid_sensor_trigger,hid_sensor_iio_common,hid_sensor_accel_3d,hid_sensor_custom
snd_soc_sst_haswell_pcm 65536 2 snd_soc_sst_broadwell
snd_soc_sst_firmware 20480 1 snd_soc_sst_haswell_pcm
snd_soc_sst_ipc 16384 1 snd_soc_sst_haswell_pcm
snd_hda_codec_hdmi 49152 1
snd_soc_rt298 40960 0
snd_soc_sst_dsp 20480 1 snd_soc_sst_haswell_pcm
wmi_bmof 16384 0
dell_wmi 16384 0
snd_hda_intel 32768 2
dell_laptop 20480 0
ledtrig_audio 16384 1 dell_laptop
snd_soc_rt286 40960 2 snd_soc_sst_broadwell
snd_intel_dspcfg 16384 1 snd_hda_intel
dell_smbios 16384 2 dell_wmi,dell_laptop
snd_soc_rl6347a 16384 2 snd_soc_rt298,snd_soc_rt286
snd_hda_codec 94208 2 snd_hda_codec_hdmi,snd_hda_intel
coretemp 16384 0
snd_soc_core 167936 4 snd_soc_rt298,snd_soc_rt286,snd_soc_sst_haswell_pcm,snd_soc_sst_broadwell
dell_wmi_descriptor 16384 2 dell_wmi,dell_smbios
snd_hda_core 57344 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
rapl 16384 0
processor_thermal_device 16384 0
intel_cstate 16384 0
snd_compress 20480 1 snd_soc_core
processor_thermal_mbox 16384 1 processor_thermal_device
iwlmvm 278528 0
snd_pcm 81920 10 snd_hda_codec_hdmi,snd_soc_rt298,snd_hda_intel,snd_soc_rt286,snd_hda_codec,snd_soc_sst_haswell_pcm,snd_compress,snd_soc_core,snd_hda_core,snd_soc_sst_broadwell
iTCO_wdt 16384 0
intel_uncore 118784 0
dcdbas 16384 1 dell_smbios
processor_thermal_rfim 20480 1 processor_thermal_device
serio_raw 16384 0
intel_pmc_bxt 16384 1 iTCO_wdt
ac97_bus 16384 1 snd_soc_core
iTCO_vendor_support 16384 1 iTCO_wdt
intel_vbtn 16384 0
mac80211 626688 1 iwlmvm
iwlwifi 262144 1 iwlmvm
processor_thermal_rapl 16384 1 processor_thermal_device
snd_hwdep 16384 1 snd_hda_codec
soc_button_array 16384 0
int3403_thermal 16384 0
int340x_thermal_zone 16384 2 int3403_thermal,processor_thermal_device
sparse_keymap 16384 2 dell_wmi,intel_vbtn
xt_MASQUERADE 16384 3
snd_timer 28672 1 snd_pcm
i2c_hid_acpi 16384 0
i2c_hid 24576 1 i2c_hid_acpi
snd_soc_sst_acpi 16384 0
dw_dmac 16384 0
dw_dmac_core 24576 2 snd_soc_sst_firmware,dw_dmac
snd_soc_acpi_intel_match 40960 1 snd_soc_sst_acpi
snd_soc_acpi 16384 2 snd_soc_sst_acpi,snd_soc_acpi_intel_match
wmi 20480 4 dell_wmi,wmi_bmof,dell_smbios,dell_wmi_descriptor
int3400_thermal 16384 0
acpi_thermal_rel 16384 1 int3400_thermal
rfcomm 32768 2
ip6table_nat 16384 1
fuse 98304 6
cmac 16384 2
algif_hash 16384 1
algif_skcipher 16384 1
af_alg 20480 6 algif_hash,algif_skcipher
cfg80211 565248 3 iwlmvm,iwlwifi,mac80211
lzo_rle 16384 4
lzo_compress 16384 1 lzo_rle
zram 20480 1
btusb 45056 0
btrtl 16384 1 btusb
btintel 24576 1 btusb
btbcm 16384 1 btusb
bluetooth 425984 34 btrtl,btintel,btbcm,btusb,rfcomm
ecdh_generic 16384 1 bluetooth
ecc 28672 1 ecdh_generic
joydev 20480 0
mousedev 20480 0
uvcvideo 98304 0
i915 1921024 12
i2c_algo_bit 16384 1 i915
drm_kms_helper 151552 1 i915
cfbimgblt 16384 1 drm_kms_helper
cfbcopyarea 16384 1 drm_kms_helper
cfbfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
fb_sys_fops 16384 1 drm_kms_helper
tpm_vtpm_proxy 16384 1
drm 344064 11 drm_kms_helper,i915
drm_panel_orientation_quirks 24576 1 drm
crosh> shell sudo su
chronos@localhost / $ dmesg
[ 0.000000] Linux version 5.4.217-15-0+ (builty@fydebeast) (Chromium OS 15.0_pre465103_p20220825-r3 clang version 15.0.0 (/var/tmp/portage/sys-devel/llvm-15.0_pre465103_p20220825-r3/work/llvm-15.0_pre465103_p20220825/clang db1978b67431ca3462ad8935bf662c15750b8252)) #1 SMP PREEMPT Sat Jan 14 10:16:03 CST 2023
[ 0.000000] Command line: BOOT_IMAGE=(loopdev,gpt12)/syslinux/vmlinuz.A init=/sbin/init root=/dev/sda5 boot=local rootwait noresume noswap ro loglevel=7 console= i915.modeset=1 cros_efi cros_debug fydeos_dualboot audit=0 audit=0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: ‘x87 floating point registers’
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: ‘SSE registers’
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: ‘AVX registers’
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using ‘standard’ format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c6125fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c6126000-0x00000000c65c6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c65c7000-0x00000000da81dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da81e000-0x00000000da8defff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da8df000-0x00000000da907fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000da908000-0x00000000db23ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000db240000-0x00000000db4e0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000db4e1000-0x00000000db5fdfff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000db5fe000-0x00000000db5fefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011e7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xda8e7000 ACPI 2.0=0xda8e7000 SMBIOS=0xf0570 MPS=0xfd800
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Dell Inc. Venue 11 Pro 7140/0HM7YW, BIOS A20 11/18/2019
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 997.638 MHz processor
[ 0.002550] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.002552] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.002564] last_pfn = 0x11e800 max_arch_pfn = 0x400000000
[ 0.002569] MTRR default type: uncachable
[ 0.002569] MTRR fixed ranges enabled:
[ 0.002571] 00000-9FFFF write-back
[ 0.002572] A0000-BFFFF uncachable
[ 0.002573] C0000-FFFFF write-protect
[ 0.002573] MTRR variable ranges enabled:
[ 0.002575] 0 base 0000000000 mask 7F00000000 write-back
[ 0.002576] 1 base 0100000000 mask 7FF0000000 write-back
[ 0.002577] 2 base 0110000000 mask 7FF8000000 write-back
[ 0.002578] 3 base 0118000000 mask 7FFC000000 write-back
[ 0.002579] 4 base 011C000000 mask 7FFE000000 write-back
[ 0.002580] 5 base 011E000000 mask 7FFF800000 write-back
[ 0.002580] 6 base 00E0000000 mask 7FE0000000 uncachable
[ 0.002581] 7 base 00DE000000 mask 7FFE000000 uncachable
[ 0.002582] 8 base 00DD000000 mask 7FFF000000 uncachable
[ 0.002583] 9 disabled
[ 0.002909] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.003358] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[ 0.003362] last_pfn = 0xdb5ff max_arch_pfn = 0x400000000
[ 0.012026] found SMP MP-table at [mem 0x000fda00-0x000fda0f]
[ 0.012049] check: Scanning 1 areas for low memory corruption
[ 0.012055] Using GB pages for direct mapping
[ 0.012536] Secure boot disabled
[ 0.012538] RAMDISK: [mem 0x37cb7000-0x37e52fff]
[ 0.012541] ACPI: Early table checksum verification disabled
[ 0.012544] ACPI: RSDP 0x00000000DA8E7000 000024 (v02 DELL )
[ 0.012548] ACPI: XSDT 0x00000000DA8E70C0 000104 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.012554] ACPI: FACP 0x00000000DA8F8DF8 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.012560] ACPI: DSDT 0x00000000DA8E7258 011B9B (v02 DELL CBX3 01072009 INTL 20120913)
[ 0.012563] ACPI: FACS 0x00000000DB23DF80 000040
[ 0.012566] ACPI: APIC 0x00000000DA8F8F08 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.012569] ACPI: FPDT 0x00000000DA8F8F90 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.012572] ACPI: FIDT 0x00000000DA8F8FD8 00009C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.012575] ACPI: MCFG 0x00000000DA8F9078 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.012578] ACPI: HPET 0x00000000DA8F90B8 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
[ 0.012581] ACPI: SSDT 0x00000000DA8F90F0 000455 (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.012585] ACPI: UEFI 0x00000000DA8F9548 000042 (v01 00000000 00000000)
[ 0.012588] ACPI: SSDT 0x00000000DA8F9590 000496 (v02 Intel_ Tpm2Tabl 00001000 INTL 20120913)
[ 0.012592] ACPI: SSDT 0x00000000DA8F9A28 00004B (v02 MeSsdt MeSsdt 00003000 INTL 20120913)
[ 0.012595] ACPI: TPM2 0x00000000DA8F9A78 000034 (v03 00000000 00000000)
[ 0.012598] ACPI: LPIT 0x00000000DA8F9AB0 000094 (v01 00000000 00000000)
[ 0.012601] ACPI: SSDT 0x00000000DA8F9B48 00090C (v02 AcpiRe ULX_RTD3 00001000 INTL 20120913)
[ 0.012604] ACPI: SSDT 0x00000000DA8FA458 00036E (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
[ 0.012607] ACPI: ASF! 0x00000000DA8FA7C8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.012610] ACPI: SSDT 0x00000000DA8FA868 0003F6 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.012614] ACPI: SSDT 0x00000000DA8FAC60 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.012617] ACPI: SSDT 0x00000000DA8FB7D8 0001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913)
[ 0.012620] ACPI: SSDT 0x00000000DA8FB9A0 0003A5 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
[ 0.012623] ACPI: PCCT 0x00000000DA8FBD48 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
[ 0.012626] ACPI: SSDT 0x00000000DA8FBDB8 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
[ 0.012629] ACPI: SSDT 0x00000000DA8FC880 0041AC (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.012633] ACPI: SSDT 0x00000000DA900A30 005233 (v01 DptfTa DptfTabl 00001000 INTL 20120913)
[ 0.012636] ACPI: SLIC 0x00000000DA905C68 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.012639] ACPI: MSDM 0x00000000DA905DE0 000055 (v03 DELL CBX3 06222004 AMI 00010013)
[ 0.012642] ACPI: DMAR 0x00000000DA905E38 0000F0 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.012645] ACPI: CSRT 0x00000000DA905F28 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528)
[ 0.012649] ACPI: BGRT 0x00000000DA905FF0 000038 (v00 \xf3\xee 01072009 AMI 00010013)
[ 0.012652] ACPI: Reserving FACP table memory at [mem 0xda8f8df8-0xda8f8f03]
[ 0.012654] ACPI: Reserving DSDT table memory at [mem 0xda8e7258-0xda8f8df2]
[ 0.012655] ACPI: Reserving FACS table memory at [mem 0xdb23df80-0xdb23dfbf]
[ 0.012656] ACPI: Reserving APIC table memory at [mem 0xda8f8f08-0xda8f8f8b]
[ 0.012658] ACPI: Reserving FPDT table memory at [mem 0xda8f8f90-0xda8f8fd3]
[ 0.012659] ACPI: Reserving FIDT table memory at [mem 0xda8f8fd8-0xda8f9073]
[ 0.012660] ACPI: Reserving MCFG table memory at [mem 0xda8f9078-0xda8f90b3]
[ 0.012661] ACPI: Reserving HPET table memory at [mem 0xda8f90b8-0xda8f90ef]
[ 0.012663] ACPI: Reserving SSDT table memory at [mem 0xda8f90f0-0xda8f9544]
[ 0.012664] ACPI: Reserving UEFI table memory at [mem 0xda8f9548-0xda8f9589]
[ 0.012665] ACPI: Reserving SSDT table memory at [mem 0xda8f9590-0xda8f9a25]
[ 0.012667] ACPI: Reserving SSDT table memory at [mem 0xda8f9a28-0xda8f9a72]
[ 0.012668] ACPI: Reserving TPM2 table memory at [mem 0xda8f9a78-0xda8f9aab]
[ 0.012669] ACPI: Reserving LPIT table memory at [mem 0xda8f9ab0-0xda8f9b43]
[ 0.012670] ACPI: Reserving SSDT table memory at [mem 0xda8f9b48-0xda8fa453]
[ 0.012672] ACPI: Reserving SSDT table memory at [mem 0xda8fa458-0xda8fa7c5]
[ 0.012673] ACPI: Reserving ASF! table memory at [mem 0xda8fa7c8-0xda8fa867]
[ 0.012674] ACPI: Reserving SSDT table memory at [mem 0xda8fa868-0xda8fac5d]
[ 0.012676] ACPI: Reserving SSDT table memory at [mem 0xda8fac60-0xda8fb7d3]
[ 0.012677] ACPI: Reserving SSDT table memory at [mem 0xda8fb7d8-0xda8fb99e]
[ 0.012678] ACPI: Reserving SSDT table memory at [mem 0xda8fb9a0-0xda8fbd44]
[ 0.012679] ACPI: Reserving PCCT table memory at [mem 0xda8fbd48-0xda8fbdb5]
[ 0.012681] ACPI: Reserving SSDT table memory at [mem 0xda8fbdb8-0xda8fc87b]
[ 0.012682] ACPI: Reserving SSDT table memory at [mem 0xda8fc880-0xda900a2b]
[ 0.012683] ACPI: Reserving SSDT table memory at [mem 0xda900a30-0xda905c62]
[ 0.012685] ACPI: Reserving SLIC table memory at [mem 0xda905c68-0xda905ddd]
[ 0.012686] ACPI: Reserving MSDM table memory at [mem 0xda905de0-0xda905e34]
[ 0.012687] ACPI: Reserving DMAR table memory at [mem 0xda905e38-0xda905f27]
[ 0.012689] ACPI: Reserving CSRT table memory at [mem 0xda905f28-0xda905feb]
[ 0.012690] ACPI: Reserving BGRT table memory at [mem 0xda905ff0-0xda906027]
[ 0.012701] ACPI: Local APIC address 0xfee00000
[ 0.012719] Zone ranges:
[ 0.012720] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.012722] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.012724] Normal [mem 0x0000000100000000-0x000000011e7fffff]
[ 0.012725] Movable zone start for each node
[ 0.012726] Early memory node ranges
[ 0.012728] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.012729] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.012731] node 0: [mem 0x0000000000100000-0x00000000c6125fff]
[ 0.012732] node 0: [mem 0x00000000c65c7000-0x00000000da81dfff]
[ 0.012733] node 0: [mem 0x00000000db5fe000-0x00000000db5fefff]
[ 0.012734] node 0: [mem 0x0000000100000000-0x000000011e7fffff]
[ 0.012951] Zeroed struct page in unavailable ranges: 29925 pages
[ 0.012953] Initmem setup node 0 [mem 0x0000000000001000-0x000000011e7fffff]
[ 0.012956] On node 0 totalpages: 1018651
[ 0.012957] DMA zone: 64 pages used for memmap
[ 0.012958] DMA zone: 25 pages reserved
[ 0.012959] DMA zone: 3997 pages, LIFO batch:0
[ 0.013013] DMA32 zone: 13902 pages used for memmap
[ 0.013014] DMA32 zone: 889726 pages, LIFO batch:63
[ 0.025453] Normal zone: 1952 pages used for memmap
[ 0.025454] Normal zone: 124928 pages, LIFO batch:31
[ 0.027101] Reserving Intel graphics memory at [mem 0xdd800000-0xdf7fffff]
[ 0.027327] ACPI: PM-Timer IO Port: 0x1808
[ 0.027329] ACPI: Local APIC address 0xfee00000
[ 0.027336] ACPI: LAPIC_NMI (acpi_id[0x01] low dfl lint[0x92])
[ 0.027337] ACPI: NMI not connected to LINT 1!
[ 0.027338] ACPI: LAPIC_NMI (acpi_id[0x02] res level lint[0x7f])
[ 0.027339] ACPI: NMI not connected to LINT 1!
[ 0.027340] ACPI: LAPIC_NMI (acpi_id[0x03] high res lint[0x17])
[ 0.027341] ACPI: NMI not connected to LINT 1!
[ 0.027342] ACPI: LAPIC_NMI (acpi_id[0x04] low edge lint[0x36])
[ 0.027343] ACPI: NMI not connected to LINT 1!
[ 0.027355] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.027358] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.027360] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.027361] ACPI: IRQ0 used by override.
[ 0.027362] ACPI: IRQ9 used by override.
[ 0.027364] Using ACPI (MADT) for SMP configuration information
[ 0.027366] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.027370] TSC deadline timer available
[ 0.027372] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.027397] [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.027400] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.027407] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.027779] percpu: Embedded 56 pages/cpu s191448 r8192 d29736 u524288
[ 0.027786] pcpu-alloc: s191448 r8192 d29736 u524288 alloc=1*2097152
[ 0.027787] pcpu-alloc: [0] 0 1 2 3
[ 0.027809] Built 1 zonelists, mobility grouping on. Total pages: 1002708
[ 0.027811] Kernel command line: BOOT_IMAGE=(loopdev,gpt12)/syslinux/vmlinuz.A init=/sbin/init root=/dev/sda5 boot=local rootwait noresume noswap ro loglevel=7 console= i915.modeset=1 cros_efi cros_debug fydeos_dualboot audit=0 audit=0
[ 0.027981] audit: disabled (until reboot)
[ 0.027990] audit: disabled (until reboot)
[ 0.028484] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.028735] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.028786] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.047776] Memory: 3558100K/4074604K available (12294K kernel code, 1143K rwdata, 2864K rodata, 1596K init, 1228K bss, 516504K reserved, 0K cma-reserved)
[ 0.047837] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.047846] Kernel/User page tables isolation: enabled
[ 0.047862] ftrace: allocating 39164 entries in 153 pages
[ 0.074400] rcu: Preemptible hierarchical RCU implementation.
[ 0.074403] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.074404] Tasks RCU enabled.
[ 0.074405] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.074407] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.076498] NR_IRQS: 4352, nr_irqs: 728, preallocated irqs: 16
[ 0.076639] random: crng init done
[ 0.076655] ACPI: Core revision 20190816
[ 0.076811] hpet: HPET dysfunctional in PC10. Force disabled.
[ 0.076812] APIC: Switch to symmetric I/O mode setup
[ 0.077146] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1cc2bf9ce56, max_idle_ns: 881590529485 ns
[ 0.077148] Calibrating delay loop (skipped), value calculated using timer frequency… 1995.27 BogoMIPS (lpj=997638)
[ 0.077150] pid_max: default: 32768 minimum: 301
[ 0.078147] LSM: Security Framework initializing
[ 0.078147] Yama: becoming mindful.
[ 0.078147] Chromium OS LSM: enabled
[ 0.078147] SELinux: Initializing.
[ 0.078147] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.078147] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.078147] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.078147] process: using mwait in idle threads
[ 0.078147] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.078147] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.078147] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.078147] Spectre V2 : Kernel not compiled with retpoline; no mitigation available!
[ 0.078147] Spectre V2 : Vulnerable
[ 0.078147] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.078147] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.078147] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.078147] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.078147] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.078147] MDS: Mitigation: Clear CPU buffers
[ 0.078147] MMIO Stale Data: Unknown: No mitigations
[ 0.078147] SRBDS: Vulnerable: No microcode
[ 0.078147] Freeing SMP alternatives memory: 36K
[ 0.078147] smpboot: CPU0: Intel(R) Core™ M-5Y10c CPU @ 0.80GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[ 0.078147] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.078147] … version: 3
[ 0.078147] … bit width: 48
[ 0.078147] … generic registers: 4
[ 0.078147] … value mask: 0000ffffffffffff
[ 0.078147] … max period: 00007fffffffffff
[ 0.078147] … fixed-purpose events: 3
[ 0.078147] … event mask: 000000070000000f
[ 0.078147] rcu: Hierarchical SRCU implementation.
[ 0.078147] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.078147] smp: Bringing up secondary CPUs …
[ 0.078147] x86: Booting SMP configuration:
[ 0.078147] … node #0, CPUs: #1 #2
[ 0.078846] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.079220] #3
[ 0.079696] smp: Brought up 1 node, 4 CPUs
[ 0.079696] smpboot: Max logical packages: 1
[ 0.079696] smpboot: Total of 4 processors activated (7981.10 BogoMIPS)
[ 0.080283] devtmpfs: initialized
[ 0.080341] PM: Registering ACPI NVS region [mem 0xda908000-0xdb23ffff] (9666560 bytes)
[ 0.080405] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.080405] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.080405] pinctrl core: initialized pinctrl subsystem
[ 0.080405] PM: RTC time: 22:20:08, date: 2023-02-04
[ 0.080405] thermal_sys: Registered thermal governor ‘bang_bang’
[ 0.080405] thermal_sys: Registered thermal governor ‘step_wise’
[ 0.080405] thermal_sys: Registered thermal governor ‘user_space’
[ 0.080417] NET: Registered protocol family 16
[ 0.081311] cpuidle: using governor ladder
[ 0.081315] cpuidle: using governor menu
[ 0.081315] Detected 1 PCC Subspaces
[ 0.081315] Registering PCC driver as Mailbox controller
[ 0.081315] ACPI FADT declares the system doesn’t support PCIe ASPM, so disable it
[ 0.081315] ACPI: bus type PCI registered
[ 0.081315] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.081315] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.081315] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.081315] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.081315] PCI: Using configuration type 1 for base access
[ 0.081487] ENERGY_PERF_BIAS: Set to ‘normal’, was ‘performance’
[ 0.083494] cryptd: max_cpu_qlen set to 1000
[ 0.084186] ACPI: Added _OSI(Module Device)
[ 0.084188] ACPI: Added _OSI(Processor Device)
[ 0.084190] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.084191] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.084193] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.084194] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.084195] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.104726] ACPI: 13 ACPI AML tables successfully acquired and loaded
[ 0.109075] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.112580] ACPI: Dynamic OEM Table Load:
[ 0.112587] ACPI: SSDT 0xFFFF89E819230000 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.113914] ACPI: Dynamic OEM Table Load:
[ 0.113921] ACPI: SSDT 0xFFFF89E819ACA000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.115396] ACPI: Dynamic OEM Table Load:
[ 0.115401] ACPI: SSDT 0xFFFF89E8190C8200 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.117543] ACPI: EC: EC started
[ 0.117544] ACPI: EC: interrupt blocked
[ 0.120782] ACPI: _SB_.PCI0.LPCB.ECDV: Used as first EC
[ 0.120785] ACPI: _SB_.PCI0.LPCB.ECDV: GPE=0xa, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.120786] ACPI: _SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.120787] ACPI: Interpreter enabled
[ 0.120813] ACPI: (supports S0 S3 S5)
[ 0.120814] ACPI: Using IOAPIC for interrupt routing
[ 0.120849] PCI: Using host bridge windows from ACPI; if necessary, use “pci=nocrs” and report a bug
[ 0.121430] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.123713] ACPI: Power Resource [PG00] (on)
[ 0.124170] ACPI: Power Resource [PG01] (on)
[ 0.124594] ACPI: Power Resource [PG02] (on)
[ 0.133081] ACPI: Power Resource [PX03] (off)
[ 0.133128] ACPI: Power Resource [PX05] (off)
[ 0.141887] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.141893] acpi PNP0A08:00: OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.141975] acpi PNP0A08:00: OSC failed (AE_ERROR); disabling ASPM
[ 0.142575] PCI host bridge to bus 0000:00
[ 0.142578] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.142580] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.142582] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.142583] pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfeafffff window]
[ 0.142586] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.142597] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 0.142713] pci 0000:00:02.0: [8086:161e] type 00 class 0x030000
[ 0.142727] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
[ 0.142734] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.142739] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.142753] pci 0000:00:02.0: DMAR: Disabling IOMMU for graphics on this chipset
[ 0.142861] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 0.142872] pci 0000:00:03.0: reg 0x10: [mem 0xf7218000-0xf721bfff 64bit]
[ 0.142994] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000
[ 0.143007] pci 0000:00:04.0: reg 0x10: [mem 0xf7210000-0xf7217fff 64bit]
[ 0.143165] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 0.143188] pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit]
[ 0.143253] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.143363] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 0.143386] pci 0000:00:16.0: reg 0x10: [mem 0xf7220000-0xf722001f 64bit]
[ 0.143453] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.143670] pci 0000:00:1c.0: [8086:9c94] type 01 class 0x060400
[ 0.143777] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.143806] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 0.143808] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 0.144055] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[ 0.144161] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.144185] pci 0000:00:1c.3: Enabling MPC IRBNCE
[ 0.144187] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled
[ 0.144356] pci 0000:00:1f.0: [8086:9cc7] type 00 class 0x060100
[ 0.144582] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[ 0.144599] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.144606] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.144614] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.144622] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.144629] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.144637] pci 0000:00:1f.2: reg 0x24: [mem 0xf721d000-0xf721d7ff]
[ 0.144676] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.144781] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 0.144800] pci 0000:00:1f.3: reg 0x10: [mem 0xf721c000-0xf721c0ff 64bit]
[ 0.144821] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.145476] pci 0000:01:00.0: [8086:095a] type 00 class 0x028000
[ 0.145577] pci 0000:01:00.0: reg 0x10: [mem 0xf7100000-0xf7101fff 64bit]
[ 0.146011] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.146695] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.146702] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.146702] pci 0000:02:00.0: [1217:8621] type 00 class 0x080501
[ 0.146702] pci 0000:02:00.0: reg 0x10: [mem 0xf7001000-0xf7001fff]
[ 0.146702] pci 0000:02:00.0: reg 0x14: [mem 0xf7000000-0xf70007ff]
[ 0.146702] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.151170] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.151176] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.151194] pci_bus 0000:00: on NUMA node 0
[ 0.160403] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.160463] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.160521] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.160578] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.160650] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.160712] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.160773] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.160835] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.163205] ACPI: EC: interrupt unblocked
[ 0.163219] ACPI: EC: event unblocked
[ 0.163231] ACPI: _SB.PCI0.LPCB.ECDV: GPE=0xa, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.163233] ACPI: _SB.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions and events
[ 0.164168] iommu: Default domain type: Translated
[ 0.164209] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.164209] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.164209] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.164209] vgaarb: loaded
[ 0.164268] SCSI subsystem initialized
[ 0.164362] libata version 3.00 loaded.
[ 0.164362] ACPI: bus type USB registered
[ 0.164362] usbcore: registered new interface driver usbfs
[ 0.164362] usbcore: registered new interface driver hub
[ 0.164362] usbcore: registered new device driver usb
[ 0.183179] i2c_designware INT3432:00: GPIO lookup for consumer scl
[ 0.183182] i2c_designware INT3432:00: using ACPI for GPIO lookup
[ 0.183186] acpi INT3432:00: GPIO: looking up scl-gpios
[ 0.183189] acpi INT3432:00: GPIO: looking up scl-gpio
[ 0.183193] i2c_designware INT3432:00: using lookup tables for GPIO lookup
[ 0.183197] i2c_designware INT3432:00: No GPIO consumer scl found
[ 0.203162] i2c_designware INT3433:00: GPIO lookup for consumer scl
[ 0.203165] i2c_designware INT3433:00: using ACPI for GPIO lookup
[ 0.203168] acpi INT3433:00: GPIO: looking up scl-gpios
[ 0.203170] acpi INT3433:00: GPIO: looking up scl-gpio
[ 0.203172] i2c_designware INT3433:00: using lookup tables for GPIO lookup
[ 0.203174] i2c_designware INT3433:00: No GPIO consumer scl found
[ 0.204698] mc: Linux media interface: v0.10
[ 0.204705] videodev: Linux video capture interface: v2.00
[ 0.204736] Registered efivars operations
[ 0.204786] chromeos_acpi: installed
[ 0.204804] Advanced Linux Sound Architecture Driver Initialized.
[ 0.204806] PCI: Using ACPI for IRQ routing
[ 0.206270] PCI: pci_cache_line_size set to 64 bytes
[ 0.209158] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.209160] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.209161] e820: reserve RAM buffer [mem 0xc6126000-0xc7ffffff]
[ 0.209162] e820: reserve RAM buffer [mem 0xda81e000-0xdbffffff]
[ 0.209164] e820: reserve RAM buffer [mem 0xdb5ff000-0xdbffffff]
[ 0.209165] e820: reserve RAM buffer [mem 0x11e800000-0x11fffffff]
[ 0.210285] clocksource: Switched to clocksource tsc-early
[ 0.225310] VFS: Disk quotas dquot_6.6.0
[ 0.225327] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.225372] pnp: PnP ACPI init
[ 0.225594] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.225596] system 00:00: [io 0xffff] has been reserved
[ 0.225598] system 00:00: [io 0xffff] has been reserved
[ 0.225600] system 00:00: [io 0xffff] has been reserved
[ 0.225602] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.225604] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.225609] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.225656] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.225699] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.225703] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.225916] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.226449] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.226451] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.226453] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.226455] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.226457] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.226459] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.226461] system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.226463] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.226465] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.226467] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.226469] system 00:04: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.226471] system 00:04: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 0.226475] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.226925] system 00:05: [mem 0xfe102000-0xfe102fff] has been reserved
[ 0.226927] system 00:05: [mem 0xfe104000-0xfe104fff] has been reserved
[ 0.226929] system 00:05: [mem 0xfe106000-0xfe106fff] has been reserved
[ 0.226933] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.230080] pnp: PnP ACPI: found 6 devices
[ 0.235066] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.235136] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.235225] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.235233] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.235238] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.235247] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.235249] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.235250] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.235252] pci_bus 0000:00: resource 7 [mem 0xdf800000-0xfeafffff window]
[ 0.235254] pci_bus 0000:01: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.235256] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff]
[ 0.235379] NET: Registered protocol family 2
[ 0.235453] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.236136] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.236145] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.236193] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.236255] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.236284] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.236295] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.236328] NET: Registered protocol family 1
[ 0.236341] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.238578] PCI: CLS 64 bytes, default 64
[ 0.238615] Unpacking initramfs…
[ 0.433882] Freeing initrd memory: 1648K
[ 0.433896] DMAR: Host address width 39
[ 0.433898] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.433911] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[ 0.433913] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.433918] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.433919] DMAR: RMRR base: 0x000000db432000 end: 0x000000db440fff
[ 0.433921] DMAR: RMRR base: 0x000000dd000000 end: 0x000000df7fffff
[ 0.433922] DMAR: ANDD device: 1 name: _SB.PCI0.SDMA
[ 0.433923] DMAR: ANDD device: 3 name: _SB.PCI0.ADSP
[ 0.433931] DMAR: ACPI device “INTL9C60:00” under DMAR at fed91000 as 00:15.0
[ 0.433934] DMAR: ACPI device “INT3438:00” under DMAR at fed91000 as 00:13.0
[ 0.433943] DMAR: No ATSR found
[ 0.433974] DMAR: dmar1: Using Queued invalidation
[ 0.434078] pci 0000:00:00.0: Adding to iommu group 0
[ 0.434089] pci 0000:00:03.0: Adding to iommu group 1
[ 0.434099] pci 0000:00:04.0: Adding to iommu group 2
[ 0.434108] pci 0000:00:14.0: Adding to iommu group 3
[ 0.434121] pci 0000:00:16.0: Adding to iommu group 4
[ 0.434131] pci 0000:00:1c.0: Adding to iommu group 5
[ 0.434140] pci 0000:00:1c.3: Adding to iommu group 6
[ 0.434164] pci 0000:00:1f.0: Adding to iommu group 7
[ 0.434173] pci 0000:00:1f.2: Adding to iommu group 7
[ 0.434184] pci 0000:00:1f.3: Adding to iommu group 7
[ 0.434194] pci 0000:01:00.0: Adding to iommu group 8
[ 0.434203] pci 0000:02:00.0: Adding to iommu group 9
[ 0.436644] platform INTL9C60:00: Adding to iommu group 10
[ 0.436701] platform INT3438:00: Adding to iommu group 11
[ 0.436737] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 0.439244] check: Scanning for low memory corruption every 60 seconds
[ 0.439586] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[ 0.441293] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.441379] Registering esdfs 0.2
[ 0.441437] alt_syscall: table ‘read_write_test’ available.
[ 0.441447] alt_syscall: table ‘android’ available.
[ 0.441458] alt_syscall: table ‘android_permissive’ available.
[ 0.441467] alt_syscall: table ‘third_party’ available.
[ 0.441475] alt_syscall: table ‘third_party_permissive’ available.
[ 0.441482] alt_syscall: table ‘complete’ available.
[ 0.441490] alt_syscall: table ‘complete_permissive’ available.
[ 0.446537] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.446539] io scheduler mq-deadline registered
[ 0.446540] io scheduler kyber registered
[ 0.446622] pci 0000:00:1c.0: attach allowed to drvr pcieport [trusted device]
[ 0.447096] pci 0000:00:1c.3: attach allowed to drvr pcieport [trusted device]
[ 0.447479] intel_idle: MWAIT substates: 0x11142120
[ 0.447481] intel_idle: v0.4.1 model 0x3D
[ 0.447745] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.448370] ACPI: AC Adapter [AC] (on-line)
[ 0.448444] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.449209] ACPI: Lid Switch [LID0]
[ 0.449248] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.451239] ACPI: Power Button [PBTN]
[ 0.455620] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.455625] ACPI: Thermal Zone [TZ01] (53 C)
[ 0.456689] hpet_acpi_add: no address or irqs in _CRS
[ 0.456856] Non-volatile memory driver v1.3
[ 0.457105] Linux agpgart interface v0.103
[ 0.457183] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel jroedel@suse.de
[ 0.457185] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.460105] loop: module loaded
[ 0.460254] lkdtm: No crash points registered, enable through debugfs
[ 0.460288] pci 0000:00:1f.0: attach allowed to drvr lpc_ich [trusted device]
[ 0.460775] pci 0000:00:1f.2: attach allowed to drvr ahci [trusted device]
[ 0.460800] ahci 0000:00:1f.2: version 3.0
[ 0.461359] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[ 0.461366] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.461868] scsi host0: ahci
[ 0.462002] scsi host1: ahci
[ 0.462107] scsi host2: ahci
[ 0.462256] scsi host3: ahci
[ 0.462299] ata1: SATA max UDMA/133 abar m2048@0xf721d000 port 0xf721d100 irq 43
[ 0.462301] ata2: DUMMY
[ 0.462302] ata3: DUMMY
[ 0.462303] ata4: DUMMY
[ 0.462493] mdio_bus fixed-0: GPIO lookup for consumer reset
[ 0.462495] mdio_bus fixed-0: using lookup tables for GPIO lookup
[ 0.462496] mdio_bus fixed-0: No GPIO consumer reset found
[ 0.462538] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 0.462540] ehci-pci: EHCI PCI platform driver
[ 0.462549] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 0.462551] ohci-pci: OHCI PCI platform driver
[ 0.462559] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.462576] pci 0000:00:14.0: attach allowed to drvr xhci_hcd [trusted device]
[ 0.462807] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.462841] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.463965] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[ 0.463970] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.464169] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 0.464172] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.464173] usb usb1: Product: xHCI Host Controller
[ 0.464175] usb usb1: Manufacturer: Linux 5.4.217-15-0+ xhci-hcd
[ 0.464176] usb usb1: SerialNumber: 0000:00:14.0
[ 0.464332] hub 1-0:1.0: USB hub found
[ 0.464345] hub 1-0:1.0: 11 ports detected
[ 0.494523] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 0.521197] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 0.770792] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.773575] ata1.00: ATA-9: LITEON LJH-128V2G, FJ70106, max UDMA/133
[ 0.773582] ata1.00: 250069680 sectors, multi 2: LBA48 NCQ (depth 32), AA
[ 0.774330] ata1.00: configured for UDMA/133
[ 0.774597] scsi 0:0:0:0: Direct-Access ATA LITEON LJH-128V2 106 PQ: 0 ANSI: 5
[ 0.775003] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 0.775018] sd 0:0:0:0: [sda] Write Protect is off
[ 0.775046] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.775069] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 0.776482] sda: sda1 sda2 sda3 sda4 sda5
[ 0.777036] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.004529] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.004751] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.004761] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.004856] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 1.004860] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.004863] usb usb2: Product: xHCI Host Controller
[ 1.004867] usb usb2: Manufacturer: Linux 5.4.217-15-0+ xhci-hcd
[ 1.004870] usb usb2: SerialNumber: 0000:00:14.0
[ 1.005220] hub 2-0:1.0: USB hub found
[ 1.005242] hub 2-0:1.0: 4 ports detected
[ 1.007323] usbcore: registered new interface driver cdc_acm
[ 1.007324] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.007467] usbcore: registered new interface driver uas
[ 1.007485] usbcore: registered new interface driver usb-storage
[ 1.007494] usbcore: registered new interface driver ums-realtek
[ 1.007510] usbcore: registered new interface driver usbserial_generic
[ 1.007514] usbserial: USB Serial support registered for generic
[ 1.007538] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.007539] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.007786] i8042: Warning: Keylock active
[ 1.008057] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.008392] rtc_cmos 00:01: RTC can wake from S4
[ 1.008629] rtc_cmos 00:01: registered as rtc0
[ 1.008632] rtc_cmos 00:01: GPIO lookup for consumer wp
[ 1.008633] rtc_cmos 00:01: using ACPI for GPIO lookup
[ 1.008635] acpi PNP0B00:00: GPIO: looking up wp-gpios
[ 1.008637] acpi PNP0B00:00: GPIO: looking up wp-gpio
[ 1.008638] rtc_cmos 00:01: using lookup tables for GPIO lookup
[ 1.008639] rtc_cmos 00:01: No GPIO consumer wp found
[ 1.008653] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 1.008676] i2c /dev entries driver
[ 1.008757] pci 0000:00:1f.3: attach allowed to drvr i801_smbus [trusted device]
[ 1.008898] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 1.008927] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.009394] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.014468] gspca_main: v2.14.0 registered
[ 1.014780] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 1.014849] device-mapper: verity-chromeos: dm-verity-chromeos registered
[ 1.014858] intel_pstate: Intel P-state driver initializing
[ 1.015120] sdhci: Secure Digital Host Controller Interface driver
[ 1.015123] sdhci: Copyright(c) Pierre Ossman
[ 1.015146] pci 0000:02:00.0: attach allowed to drvr sdhci-pci [trusted device]
[ 1.015200] sdhci-pci 0000:02:00.0: SDHCI controller found [1217:8621] (rev 1)
[ 1.019822] mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA
[ 1.021847] Driver ‘memconsole’ was unable to register with bus_type ‘coreboot’ because the bus was not initialized.
[ 1.021851] Driver ‘vpd’ was unable to register with bus_type ‘coreboot’ because the bus was not initialized.
[ 1.021854] EFI Variables Facility v0.08 2004-May-17
[ 1.027889] pstore: Registered efi as persistent store backend
[ 1.027908] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.028058] usbcore: registered new interface driver usbhid
[ 1.028061] usbhid: USB HID core driver
[ 1.028156] ashmem: initialized
[ 1.028495] intel_rapl_common: Found RAPL domain package
[ 1.028499] intel_rapl_common: Found RAPL domain core
[ 1.028501] intel_rapl_common: Found RAPL domain uncore
[ 1.028505] intel_rapl_common: Found RAPL domain dram
[ 1.028510] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 1.028525] intel_rapl_common: RAPL package-0 domain dram locked by BIOS
[ 1.028952] GACT probability NOT on
[ 1.029352] xt_time: kernel timezone is -0000
[ 1.029546] Initializing XFRM netlink socket
[ 1.029749] NET: Registered protocol family 10
[ 1.030133] Segment Routing with IPv6
[ 1.030250] NET: Registered protocol family 17
[ 1.030756] microcode: sig=0x306d4, pf=0x80, revision=0x2e
[ 1.030821] microcode: Microcode Update Driver: v2.2.
[ 1.030826] IPI shorthand broadcast: enabled
[ 1.030841] AVX2 version of gcm_enc/dec engaged.
[ 1.030843] AES CTR mode by8 optimization enabled
[ 1.031639] sched_clock: Marking stable (1031111205, 519173)->(1050064054, -18433676)
[ 1.031730] registered taskstats version 1
[ 1.031747] Key type ._fscrypt registered
[ 1.031749] Key type .fscrypt registered
[ 1.031856] pstore: Using crash dump compression: deflate
[ 1.032192] Key type encrypted registered
[ 1.032711] PM: Magic number: 11:879:349
[ 1.032932] ALSA device list:
[ 1.032936] No soundcards found.
[ 1.032956] Warning: unable to open an initial console.
[ 1.034364] Freeing unused kernel image memory: 1596K
[ 1.044266] Write protecting the kernel read-only data: 18432k
[ 1.045278] Freeing unused kernel image memory: 2020K
[ 1.045773] Freeing unused kernel image memory: 1232K
[ 1.045822] Run /init as init process
[ 1.072749] /sbin/bootstrap.sh: Finding best TTY from null…
[ 1.074216] /sbin/bootstrap.sh: TTY=/dev/null LOG= INFO= DEBUG=
[ 1.138750] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 1.201654] EXT4-fs (loop0p3): mounting ext2 file system using the ext4 subsystem
[ 1.205782] EXT4-fs (loop0p3): mounted filesystem without journal. Opts: (null)
[ 1.246161] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 1.301937] SELinux: policy capability network_peer_controls=1
[ 1.301940] SELinux: policy capability open_perms=1
[ 1.301941] SELinux: policy capability extended_socket_class=1
[ 1.301942] SELinux: policy capability always_check_network=0
[ 1.301943] SELinux: policy capability cgroup_seclabel=0
[ 1.301944] SELinux: policy capability nnp_nosuid_transition=1
[ 1.396882] usb 1-3: New USB device found, idVendor=0bda, idProduct=5757, bcdDevice=46.20
[ 1.396887] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.396889] usb 1-3: Product: Integrated_Webcam_FHD
[ 1.396892] usb 1-3: Manufacturer: CN0C7YG17248761G06AMA00
[ 1.396894] usb 1-3: SerialNumber: 200901010001
[ 1.453162] tsc: Refined TSC clocksource calibration: 997.690 MHz
[ 1.453170] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cc321c3cba, max_idle_ns: 881590491283 ns
[ 1.453184] clocksource: Switched to clocksource tsc
[ 1.513164] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[ 1.601127] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 1.616478] udevd[316]: starting version 225
[ 1.642058] usb 1-4: New USB device found, idVendor=06cb, idProduct=2819, bcdDevice= 0.20
[ 1.642063] usb 1-4: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[ 1.642066] usb 1-4: Product: Synaptics T Pad V 01.31
[ 1.642068] usb 1-4: SerialNumber: 066CFF515354885087184141
[ 1.645255] input: Synaptics T Pad V 01.31 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:06CB:2819.0001/input/input3
[ 1.645353] input: Synaptics T Pad V 01.31 Touchpad as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:06CB:2819.0001/input/input4
[ 1.645474] hid-multitouch 0003:06CB:2819.0001: input,hiddev96,hidraw0: USB HID v1.11 Mouse [Synaptics T Pad V 01.31] on usb-0000:00:14.0-4/input0
[ 1.646592] input: Synaptics T Pad V 01.31 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:06CB:2819.0002/input/input6
[ 1.698356] hid-generic 0003:06CB:2819.0002: input,hidraw1: USB HID v1.10 Keyboard [Synaptics T Pad V 01.31] on usb-0000:00:14.0-4/input1
[ 1.699469] input: Synaptics T Pad V 01.31 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:06CB:2819.0003/input/input7
[ 1.699556] input: Synaptics T Pad V 01.31 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:06CB:2819.0003/input/input8
[ 1.699632] input: Synaptics T Pad V 01.31 Wireless Radio Control as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/0003:06CB:2819.0003/input/input9
[ 1.699754] hid-generic 0003:06CB:2819.0003: input,hiddev97,hidraw2: USB HID v1.10 Device [Synaptics T Pad V 01.31] on usb-0000:00:14.0-4/input2
[ 1.729338] EXT4-fs (loop0p1): mounted filesystem with ordered data mode. Opts: commit=0,discard
[ 1.755247] EXT4-fs (loop0p8): mounted filesystem with ordered data mode. Opts: (null)
[ 1.790497] EXT4-fs (loop0p1): re-mounted. Opts: discard,resgid=20119
[ 1.814161] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 1.864478] pci 0000:00:02.0: attach allowed to drvr i915 [trusted device]
[ 1.866342] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.866345] [drm] Driver supports precise vblank timestamp query.
[ 1.867000] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.893033] [drm] Initialized i915 1.6.0 20200114 for 0000:00:02.0 on minor 0
[ 1.895352] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.895955] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 1.900178] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 1.908938] init: udev-trigger-early main process (319) terminated with status 2
[ 1.987779] EXT4-fs (loop2): mounted filesystem without journal. Opts: (null)
[ 1.992357] tpm tpm0: A TPM error (256) occurred attempting the self test
[ 1.992363] tpm tpm0: starting up the TPM manually
[ 2.112964] usb 1-5: New USB device found, idVendor=0bda, idProduct=575c, bcdDevice=49.05
[ 2.112969] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.112972] usb 1-5: Product: Integrated_Webcam_8M
[ 2.112974] usb 1-5: Manufacturer: CN09GCTG7248762HB4N1A02
[ 2.112977] usb 1-5: SerialNumber: 200901010001
[ 2.234166] usb 1-7: new full-speed USB device number 5 using xhci_hcd
[ 2.281198] mmc0: new ultra high speed SDR104 SDHC card at address 59b4
[ 2.283333] mmcblk0: mmc0:59b4 USD00 29.5 GiB
[ 2.289952] mmcblk0: p1
[ 2.363755] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[ 2.363762] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.815836] usb 1-3: GPIO lookup for consumer privacy
[ 2.815839] usb 1-3: using ACPI for GPIO lookup
[ 2.815842] acpi device:41: GPIO: looking up privacy-gpios
[ 2.815845] acpi device:41: GPIO: looking up privacy-gpio
[ 2.815847] usb 1-3: using lookup tables for GPIO lookup
[ 2.815849] usb 1-3: No GPIO consumer privacy found
[ 2.815852] usb 1-3: Found UVC 1.00 device Integrated_Webcam_FHD (0bda:5757)
[ 2.827931] input: Integrated_Webcam_FHD: Integrat as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input11
[ 2.832724] mousedev: PS/2 mouse device common for all mice
[ 2.835206] usb 1-5: GPIO lookup for consumer privacy
[ 2.835209] usb 1-5: using ACPI for GPIO lookup
[ 2.835211] acpi device:44: GPIO: looking up privacy-gpios
[ 2.835214] acpi device:44: GPIO: looking up privacy-gpio
[ 2.835216] usb 1-5: using lookup tables for GPIO lookup
[ 2.835218] usb 1-5: No GPIO consumer privacy found
[ 2.835221] usb 1-5: Found UVC 1.00 device Integrated_Webcam_8M (0bda:575c)
[ 2.842236] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: discard,commit=600
[ 2.874526] Bluetooth: Core ver 2.22
[ 2.874550] NET: Registered protocol family 31
[ 2.874552] Bluetooth: HCI device and connection manager initialized
[ 2.874557] Bluetooth: HCI socket layer initialized
[ 2.874560] Bluetooth: L2CAP socket layer initialized
[ 2.874571] Bluetooth: SCO socket layer initialized
[ 2.875063] input: Integrated_Webcam_8M: Rear Inte as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input12
[ 2.875178] usbcore: registered new interface driver uvcvideo
[ 2.878752] usb 1-7: GPIO lookup for consumer reset
[ 2.878755] usb 1-7: using ACPI for GPIO lookup
[ 2.878758] acpi device:47: GPIO: looking up reset-gpios
[ 2.878761] acpi device:47: GPIO: looking up reset-gpio
[ 2.878764] usb 1-7: using lookup tables for GPIO lookup
[ 2.878766] usb 1-7: No GPIO consumer reset found
[ 2.880610] usbcore: registered new interface driver btusb
[ 2.897869] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 2.900218] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 3.215862] frecon[780]: Frecon using drm driver i915, version 1.6, date(20200114), desc(Intel Graphics) using atomic
[ 3.223878] Bluetooth: hci0: Intel BT fw patch 0x32 completed & activated
[ 3.290344] EXT4-fs (loop0p1): re-mounted. Opts: discard,resgid=20119
[ 3.369591] low_mem: threshold[0] 202 MB
[ 3.369595] low_mem: threshold[1] 1556 MB
[ 3.382459] zram: Added device: zram0
[ 3.405652] init: auditd post-start process (868) terminated with status 1
[ 3.442598] init: auditd main process (856) terminated with status 1
[ 3.442622] init: auditd main process ended, respawning
[ 3.455987] overlayfs: “xino” feature enabled using 32 upper inode bits.
[ 3.463494] zram0: detected capacity change from 0 to 7968370688
[ 3.469401] init: auditd main process (957) terminated with status 1
[ 3.469428] init: auditd main process ended, respawning
[ 3.473510] init: auditd post-start process (959) terminated with status 1
[ 3.484193] Adding 7781608k swap on /dev/zram0. Priority:-2 extents:1 across:7781608k SS
[ 3.497451] init: auditd post-start process (989) terminated with status 1
[ 3.506793] init: auditd main process (988) terminated with status 1
[ 3.506816] init: auditd main process ended, respawning
[ 3.521135] init: auditd main process (1014) terminated with status 1
[ 3.521171] init: auditd main process ended, respawning
[ 3.529024] init: auditd post-start process (1015) terminated with status 1
[ 3.547078] init: auditd main process (1042) terminated with status 1
[ 3.547105] init: auditd main process ended, respawning
[ 3.550229] init: auditd post-start process (1045) terminated with status 1
[ 3.563026] init: auditd post-start process (1062) terminated with status 1
[ 3.567289] init: auditd main process (1061) terminated with status 1
[ 3.567314] init: auditd main process ended, respawning
[ 3.580594] init: auditd main process (1078) terminated with status 1
[ 3.580617] init: auditd main process ended, respawning
[ 3.582500] init: auditd post-start process (1080) terminated with status 1
[ 3.595990] init: auditd main process (1089) terminated with status 1
[ 3.596014] init: auditd main process ended, respawning
[ 3.598332] init: auditd post-start process (1091) terminated with status 1
[ 3.612865] init: auditd post-start process (1101) terminated with status 1
[ 3.614183] init: auditd main process (1099) terminated with status 1
[ 3.614205] init: auditd main process ended, respawning
[ 3.627865] init: auditd main process (1110) terminated with status 1
[ 3.627885] init: auditd main process ended, respawning
[ 3.631043] init: auditd post-start process (1113) terminated with status 1
[ 3.643736] init: auditd main process (1122) terminated with status 1
[ 3.643753] init: auditd respawning too fast, stopped
[ 3.647651] init: auditd post-start process (1124) terminated with status 1
[ 3.856323] NET: Registered protocol family 38
[ 3.997950] Bluetooth: quality report not supported
[ 7.895158] NOHZ: local_softirq_pending 282
[ 7.911165] NOHZ: local_softirq_pending 202
[ 11.070022] EXT4-fs (loop0p8): re-mounted. Opts:
[ 11.129699] init: failsafe-delay main process (1142) killed by TERM signal
[ 11.187161] fuse: init (API version 7.32)
[ 11.519982] Bluetooth: RFCOMM socket layer initialized
[ 11.520012] Bluetooth: RFCOMM ver 1.11
[ 11.524765] ACPI Warning: _SB.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20190816/nspredef-258)
[ 11.524778] ACPI: Invalid package element [0]: got number, expecting [R]
[ 11.524780] _ART package 0 is invalid, ignored
[ 11.552127] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 11.626258] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 11.819061] hid-multitouch 0018:06CB:780D.0004: set stylus mtclass:18
[ 11.819130] input: SYNA7500:00 06CB:780D Stylus as /devices/pci0000:00/INT3433:00/i2c-1/i2c-SYNA7500:00/0018:06CB:780D.0004/input/input13
[ 11.820572] hid-multitouch 0018:06CB:780D.0004: set touchscreen mtclass:18
[ 11.820634] input: SYNA7500:00 06CB:780D as /devices/pci0000:00/INT3433:00/i2c-1/i2c-SYNA7500:00/0018:06CB:780D.0004/input/input14
[ 12.156922] Intel(R) Wireless WiFi driver for Linux
[ 12.156925] Copyright(c) 2003- 2015 Intel Corporation
[ 12.156956] pci 0000:01:00.0: attach allowed to drvr iwlwifi [trusted device]
[ 12.168274] pcieport 0000:00:1c.0: Enabling MPC IRBNCE
[ 12.168288] pcieport 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 12.168832] iwlwifi 0000:01:00.0: enabling device (0000 → 0002)
[ 12.193149] iwlwifi 0000:01:00.0: Found debug destination: EXTERNAL_DRAM
[ 12.193161] iwlwifi 0000:01:00.0: Found debug configuration: 0
[ 12.194259] iwlwifi 0000:01:00.0: loaded firmware version 29.4063824552.0 op_mode iwlmvm
[ 12.386670] input: Intel Virtual Button driver as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input16
[ 12.420302] iTCO_vendor_support: vendor-support=0
[ 15.916530] hid-multitouch 0018:06CB:780D.0004: input,hidraw3: I2C HID v1.00 Device [SYNA7500:00 06CB:780D] on i2c-SYNA7500:00
[ 15.917324] hid-generic 0018:0483:91D1.0005: hidraw4: I2C HID v1.00 Device [SMO91D0:00 0483:91D1] on i2c-SMO91D0:00
[ 15.949443] udevd[2097]: Process ‘/bin/chown power:power /sys//devices/platform/Fixed MDIO bus.0/power/control’ failed with exit code 1.
[ 15.959224] udevd[2097]: Process ‘/bin/chown power:power /sys//devices/platform/Fixed MDIO bus.0/mdio_bus/fixed-0/power/control’ failed with exit code 1.
[ 16.058388] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[ 16.058772] pci 0000:00:00.0: attach allowed to drvr bdw_uncore [trusted device]
[ 16.064358] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 16.066862] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[ 16.076495] pci 0000:00:04.0: attach allowed to drvr proc_thermal [trusted device]
[ 16.076541] proc_thermal 0000:00:04.0: enabling device (0000 → 0002)
[ 16.078639] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 16.078749] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 16.078753] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 16.078755] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 16.078757] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 16.078759] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 16.079655] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.080029] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[ 16.080481] iwlwifi 0000:01:00.0: Allocated 0x00400000 bytes for firmware monitor.
[ 16.085536] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[ 16.088628] iwlwifi 0000:01:00.0: base HW address: 10:02:b5:a4:04:b1
[ 16.159681] ieee80211 phy0: Selected rate control algorithm ‘iwl-mvm-rs’
[ 16.160457] thermal thermal_zone10: failed to read out thermal zone (-61)
[ 16.183841] pci 0000:00:03.0: attach allowed to drvr snd_hda_intel [trusted device]
[ 16.188394] snd_hda_intel 0000:00:03.0: enabling device (0000 → 0002)
[ 16.191668] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_gem_object_put [i915])
[ 16.221089] udevd[2193]: Process ‘/bin/chown -R root:wilco_dtc /sys/firmware/dmi/tables’ failed with exit code 1.
[ 16.727147] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input17
[ 16.742524] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 16.742628] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 16.742718] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 16.742809] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[ 16.742900] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
[ 16.808364] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[ 16.816422] sst-acpi INT3438:00: DesignWare DMA Controller, 8 channels
[ 16.864054] haswell-pcm-audio haswell-pcm-audio: Direct firmware load for intel/IntcPP01.bin failed with error -2
[ 16.864062] haswell-pcm-audio haswell-pcm-audio: fw image intel/IntcPP01.bin not available(-2)
[ 16.865140] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[ 16.870923] rt286 i2c-INT343A:00: ASoC: sink widget DMIC1 overwritten
[ 16.870937] rt286 i2c-INT343A:00: ASoC: source widget DMIC1 overwritten
[ 16.882831] input: broadwell-rt286 Headset as /devices/pci0000:00/INT3438:00/broadwell-audio/sound/card1/input23
[ 16.896247] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
[ 16.897705] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring
[ 17.183121] EXT4-fs (loop0p8): re-mounted. Opts:
[ 17.385432] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[ 17.496246] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[ 17.710144] init: send-boot-metrics main process (3404) terminated with status 1
[ 48.194213] ata1.00: exception Emask 0x0 SAct 0x1000 SErr 0x0 action 0x6 frozen
[ 48.194227] ata1.00: failed command: READ FPDMA QUEUED
[ 48.194245] ata1.00: cmd 60/10:60:20:0f:24/00:00:0a:00:00/40 tag 12 ncq dma 8192 in
res 40/00:01:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[ 48.194252] ata1.00: status: { DRDY }
[ 48.194262] ata1: hard resetting link
[ 48.506669] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 48.509787] ata1.00: configured for UDMA/133
[ 48.509825] sd 0:0:0:0: [sda] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 48.509829] sd 0:0:0:0: [sda] tag#12 Sense Key : Illegal Request [current]
[ 48.509832] sd 0:0:0:0: [sda] tag#12 Add. Sense: Unaligned write command
[ 48.509834] sd 0:0:0:0: [sda] tag#12 CDB: Read(10) 28 00 0a 24 0f 20 00 00 10 00
[ 48.509837] blk_update_request: I/O error, dev sda, sector 170135328 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0
[ 48.509858] ata1: EH complete
[ 48.524698] init: send-uptime-metrics main process (1917) terminated with status 2
[ 48.791984] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[ 49.345136] NOHZ: local_softirq_pending 10
[ 50.608597] NOHZ: local_softirq_pending 292
[ 53.466328] SELinux: Context is not valid (left unmapped).
[ 53.467324] cgroup1: Unknown subsys name ‘memory’
[ 53.469912] cgroup1: Unknown subsys name ‘schedtune’
[ 53.480312] new mount options do not match the existing superblock, will be ignored
[ 53.543156] NOHZ: local_softirq_pending 202
[ 53.630912] NOHZ: local_softirq_pending 10
[ 53.761044] NOHZ: local_softirq_pending 10
[ 53.761080] NOHZ: local_softirq_pending 10
[ 54.023559] NOHZ: local_softirq_pending 10
[ 54.023638] NOHZ: local_softirq_pending 10
[ 57.713554] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
[ 59.793612] capability: warning: `main’ uses 32-bit capabilities (legacy support in use)
[ 67.312254] usb 1-2: new low-speed USB device number 6 using xhci_hcd
[ 67.443828] usb 1-2: New USB device found, idVendor=1c4f, idProduct=0034, bcdDevice= 1.10
[ 67.443837] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 67.443842] usb 1-2: Product: Usb Mouse
[ 67.443847] usb 1-2: Manufacturer: SIGMACHIP
[ 67.447851] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1C4F:0034.0006/input/input24
[ 67.449140] hid-generic 0003:1C4F:0034.0006: input,hidraw4: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:14.0-2/input0
[ 73.204246] wlan0: authenticate with bc:d1:77:c6:ce:c8
[ 73.212310] wlan0: send auth to bc:d1:77:c6:ce:c8 (try 1/3)
[ 73.225141] wlan0: authenticated
[ 73.226176] wlan0: associate with bc:d1:77:c6:ce:c8 (try 1/3)
[ 73.235657] wlan0: RX AssocResp from bc:d1:77:c6:ce:c8 (capab=0x431 status=0 aid=2)
[ 73.262530] wlan0: associated
[ 73.559119] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 73.561193] wlan0: dropped frame to bc:d1:77:c6:ce:c8 (unauthorized port)
[ 73.596971] 8021q: 802.1Q VLAN Support v1.8
[ 75.401676] EXT4-fs (loop0p3): re-mounted. Opts:
[ 76.385954] EXT4-fs (loop0p3): re-mounted. Opts:
[ 357.357128] fscrypt: AES-256-CTS-CBC using implementation “cts(cbc-aes-aesni)”
[ 357.375030] fscrypt: AES-256-XTS using implementation “xts-aes-aesni”
[ 357.746252] NET: Registered protocol family 40
[ 357.765305] Bluetooth: quality report not supported
[ 358.221401] init: arc-kmsg-logger main process (4086) killed by TERM signal
[ 374.811934] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19
chronos@localhost / $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 10: HDMI 4 [HDMI 4]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: broadwellrt286 [broadwell-rt286], device 0: System Playback/Capture () []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: broadwellrt286 [broadwell-rt286], device 1: Offload0 Playback () []
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: broadwellrt286 [broadwell-rt286], device 2: Offload1 Playback (*) []
Subdevices: 1/1
Subdevice #0: subdevice #0
我不是程序员 我是按网上的说明做出来的fydeos系统文件 你看看 谢谢 麻烦了
凤凰OS 没有终端 那个看不到吧 凤凰只有外音插入耳机还是外放 每次装凤凰在看Windows声音都不能播放非要删掉凤凰才能
那个声卡型号不是看那个dev后面的343 吗 我以前黑苹果注入ID 查了半天都找不到这个型号 你怎么看得出来是ALC 235
我也是在远景的那个贴子里看别人说的，fydeos里面加载了RT298和RT286.不知道overwritten算不算报错。
[ 16.870923] rt286 i2c-INT343A:00: ASoC: sink widget DMIC1 overwritten
[ 16.870937] rt286 i2c-INT343A:00: ASoC: source widget DMIC1 overwritten
[ 16.882831] input: broadwell-rt286 Headset as /devices/pci0000:00/INT3438:00/broadwell-audio/sound/card1/input23
dmesg 可以附加些参数过滤出需要的信息。
好像 dmesg | grep -i ‘rt286’
一般就用snd、芯片型号、模块名、ASoC这几个。
snd_soc_sst_haswell_pcm 65536 2 snd_soc_sst_broadwell
snd_soc_sst_firmware 20480 1 snd_soc_sst_haswell_pcm
snd_soc_sst_ipc 16384 1 snd_soc_sst_haswell_pcm
snd_hda_codec_hdmi 49152 1
snd_soc_rt298 40960 0
snd_soc_sst_dsp 20480 1 snd_soc_sst_haswell_pcm
看到这里出现了好几个SST，配置文件应该和SST有关。参考这个贴子。
凤凰OS里面用alt + F1可以进终端，alt + F7返回桌面，安装个终端模拟器也可以。
用完凤凰OS后windows没有声音，一般是设备没有成功复位，常用长按开关键几秒强制复位。
凤凰OS
WARNING: linker: /data/app/com.termoneplus-1/lib/x86_64/libexec-t1plus.so: unsupported flags DT_FLAGS_1=0x8000001
x86_64:/ $ lsmod
Module Size Used by
ccm 20480 3
soc_button_array 16384 0
dell_laptop 20480 0
coretemp 16384 0
hwmon 16384 1 coretemp
intel_rapl 20480 0
x86_pkg_temp_thermal 16384 0
intel_powerclamp 16384 0
crc32_pclmul 16384 0
crc32c_intel 24576 0
ghash_clmulni_intel 16384 0
atkbd 24576 0
pcspkr 16384 0
wmi_bmof 16384 0
dell_wmi 16384 0
dell_smbios 16384 2 dell_laptop,dell_wmi
dcdbas 16384 1 dell_smbios
wmi 20480 2 wmi_bmof,dell_wmi
efi_pstore 16384 0
efivars 20480 1 efi_pstore
int3400_thermal 16384 0
acpi_thermal_rel 16384 1 int3400_thermal
dw_dmac 16384 0
mei_me 40960 0
mei 94208 1 mei_me
processor_thermal_device 16384 0
intel_soc_dts_iosf 16384 1 processor_thermal_device
dv11p_tablet 16384 0
intel_vbtn 16384 0
sparse_keymap 16384 2 dell_wmi,intel_vbtn
iwlmvm 266240 0
int3403_thermal 16384 0
int340x_thermal_zone 16384 2 processor_thermal_device,int3403_thermal
mac80211 651264 1 iwlmvm
lpc_ich 24576 0
iwlwifi 192512 1 iwlmvm
wl 6451200 0
cfg80211 630784 4 iwlmvm,mac80211,iwlwifi,wl
snd_hda_codec_hdmi 53248 1
i915 1642496 10
drm_kms_helper 159744 1 i915
drm 380928 11 i915,drm_kms_helper
fb_sys_fops 16384 1 drm_kms_helper
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
i2c_algo_bit 16384 1 i915
snd_hda_intel 40960 0
snd_hda_codec 126976 2 snd_hda_codec_hdmi,snd_hda_intel
snd_hda_core 81920 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_hwdep 16384 1 snd_hda_codec
snd_soc_rt298 40960 0
btusb 45056 0
btrtl 16384 1 btusb
btbcm 16384 1 btusb
btintel 20480 1 btusb
bluetooth 540672 5 btusb,btrtl,btbcm,btintel
ecdh_generic 24576 1 bluetooth
joydev 20480 0
hid_sensor_als 16384 0
hid_sensor_rotation 16384 0
hid_sensor_incl_3d 16384 0
hid_sensor_magn_3d 16384 0
hid_sensor_gyro_3d 16384 0
hid_sensor_accel_3d 16384 2
hid_sensor_trigger 16384 12 hid_sensor_als,hid_sensor_rotation,hid_sensor_incl_3d,hid_sensor_magn_3d,hid_sensor_gyro_3d,hid_sensor_accel_3d
industrialio_triggered_buffer 16384 6 hid_sensor_als,hid_sensor_rotation,hid_sensor_incl_3d,hid_sensor_magn_3d,hid_sensor_gyro_3d,hid_sensor_accel_3d
kfifo_buf 16384 1 industrialio_triggered_buffer
industrialio 69632 11 hid_sensor_als,hid_sensor_rotation,hid_sensor_incl_3d,hid_sensor_magn_3d,hid_sensor_gyro_3d,hid_sensor_accel_3d,hid_sensor_trigger,industrialio_triggered_buffer,kfifo_buf
hid_sensor_iio_common 16384 7 hid_sensor_als,hid_sensor_rotation,hid_sensor_incl_3d,hid_sensor_magn_3d,hid_sensor_gyro_3d,hid_sensor_accel_3d,hid_sensor_trigger
hid_multitouch 20480 0
hid_sensor_hub 20480 8 hid_sensor_als,hid_sensor_rotation,hid_sensor_incl_3d,hid_sensor_magn_3d,hid_sensor_gyro_3d,hid_sensor_accel_3d,hid_sensor_trigger,hid_sensor_iio_common
uvcvideo 90112 2
videobuf2_vmalloc 16384 1 uvcvideo
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_v4l2 24576 1 uvcvideo
videobuf2_core 40960 2 uvcvideo,videobuf2_v4l2
i2c_hid 20480 0
i2c_i801 28672 0
mac_hid 16384 0
snd_soc_sst_broadwell 16384 0
snd_soc_rt286 40960 2 snd_soc_sst_broadwell
snd_soc_rl6347a 16384 2 snd_soc_rt298,snd_soc_rt286
snd_soc_sst_haswell_pcm 94208 3 snd_soc_sst_broadwell
snd_soc_sst_firmware 28672 1 snd_soc_sst_haswell_pcm
snd_soc_sst_ipc 16384 1 snd_soc_sst_haswell_pcm
snd_soc_sst_dsp 32768 1 snd_soc_sst_haswell_pcm
snd_soc_core 245760 4 snd_soc_rt298,snd_soc_sst_broadwell,snd_soc_rt286,snd_soc_sst_haswell_pcm
snd_compress 20480 1 snd_soc_core
snd_pcm_dmaengine 16384 1 snd_soc_core
snd_pcm 102400 9 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core,snd_soc_rt298,snd_soc_rt286,snd_soc_sst_haswell_pcm,snd_soc_core,snd_pcm_dmaengine
snd_timer 32768 1 snd_pcm
snd 81920 9 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_soc_sst_haswell_pcm,snd_soc_core,snd_compress,snd_pcm,snd_timer
soundcore 16384 1 snd
ac97_bus 16384 1 snd_soc_core
snd_soc_sst_acpi 16384 0
snd_soc_sst_match 16384 1 snd_soc_sst_acpi
shpchp 36864 0
x86_64:/ $
x86_64:/ $
x86_64:/ $
x86_64:/ $ alsa_aplay -l
aplay: device_list:242: no soundcards found…
x86_64:/ $
那个关机复位 还是不行 只要装了凤凰 win必定声音出现红叉 删掉重新安装驱动 就好了 重启就又是老样子 驱动显示 该设备无法启动 代码10 找不到对象名 网上解释是安装第三方冲突 这也解释的了
实在不行 只能放弃了这个fydeos 太可惜 非专业人士太难搞
我苹果本倒是可以完美安装 但是不是触屏 我手里这个是倒是11.6 装好了就是ipad 哈哈
能给个efi吗
网上查到型号是alc3263
我卖了 打算买de l l 5175 现在还没买 哈哈哈